GMC Yukon XL 4WD
GMC · Cars · 2026
GMC Yukon XL 4WD
90
16 complaints
status.verdict
status.certified
status.certified_sub
product.specifications
specs.g_fuel_economy
specs.city_mpg20
specs.highway_mpg24
specs.combined_mpg22
specs.annual_fuel_cost$3850
specs.ghg_score4 / 10
specs.g_engine_drivetrain
specs.engine_size3 L
specs.cylinders6
specs.fuel_typeDiesel
specs.transmissionAutomatic 10-spd
specs.drivetrain4-Wheel Drive
CO₂460 g/mi
specs.g_classification
specs.vehicle_classStandard Sport Utility Vehicle 4×4
specs.typeDiesel

specs.data_sourced_from FuelEconomy.gov (specs.energy_dept)

product.complaints_section16 total
GMC YUKON XL 2026 UNKNOWN OR OTHER
high
While operating the vehicle, I began to hear a metallic grinding noise originating from the center of the engine compartment. The sound was clearly audible within the cabin. Approximately one mile before the vehicle ultimately failed, the engine began to malfunction. As I slowed to a stoplight, the vehicle started to shake before shutting off abruptly and entering a coasting state. All electrical systems powered down and the vehicle would not restart. Shortly thereafter, heavy smoke began to emit both inside and outside the cabin, visibly coming from the hood and through the air vents. There was also a distinct burning odor. I attempted to restart the vehicle multiple times without success. The dashboard displayed the message: “conditions not suitable to shift.” Due to the vehicle becoming disabled on a curve and posing a safety hazard, I contacted the Sheriff’s Office for assistance to prevent a potential collision. Upon their arrival, it was noted that the engine compartment and hood area were exceptionally hot, particularly where the smoke was originating. The dealership has since confirmed they have also been unable to restart the vehicle. The vehicle has been inspected by the GMC dealer and is currently pending further evaluation by a GM-certified mechanic to determine the root cause. Prior to this incident, there were no warning lights, system messages, or other noticeable symptoms indicating an issue.
NHTSAUSMay 2026Source →
GMC YUKON XL 2026 ENGINE
low
Car Engine stopped , shut down on I 475 South Macon GA at 70 mph in left lane. Had to coast to right shoulder. Towed to Hutchinson GMC in Macon GA and it was determined the Engine had locked up. 2026 with 4200 miles, Purchased January 2nd 2026.
NHTSAUSMay 2026Source →
GMC YUKON XL 2026 ENGINE
medium
Catastrophic engine failure of 3.0l Diesel engine with only 2000 miles on it.
NHTSAUSMay 2026Source →
GMC YUKON XL 2026 VISIBILITY:WINDSHIELD
medium
The contact owns a 2026 GMC Yukon XL. The contact stated while parked and occupied in the vehicle or driving at night he can only see out of the bottom of the windshield. a dealer was contacted. The vehicle was taken to the dealer, and they offered no assistance. The vehicle was not repaired. The manufacturer was notified of the failure, and they informed him they will call the dealer to take a look at the vehicle at night. The failure mileage was 150.
NHTSAUSApr 2026Source →
GMC YUKON XL 2026 FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
low
I was on the Highway and had the vehicle on cruise control, the super cruise was not available the entire trip. Suddenly a warning came on saying that supper cruise was not available please take the wheel, the truck started slowing down drastically while I’m doing 70mph which is the speed limit. I put my foot on the brake to disengage the cruise control but that did not work. I had to push the cancel button on the wheel to take it off. This has happened to me twice while on the highway.
NHTSAUSApr 2026Source →
product.discussion0 product.comments
product.no_discussion
product.status_history
status.uncertainstatus.certified31 May 2026
Lemon Score: 92. 11 data points. v3 scoring.
product.had_issue
product.help_others
product.submit_complaint