While using the Park Assist feature on my 2024 BMW X5, the vehicle was under active system control during a parking maneuver. The system directed the vehicle in reverse and struck an object. I did not apply the accelerator. The vehicle was operating under Park Assist guidance at the time of impact. The collision resulted in damage to the rear bumper. I have reported this to BMW North America and requested a diagnostic scan to retrieve fault codes from the Park Assist module. What component or system failed or malfunctioned, and is it available for inspection upon request? The Park Assist system (automated parking assistance) malfunctioned during an active parking maneuver. While the system was in control of the vehicle, it directed the car in reverse and struck an object. The vehicle is available for inspection upon request. How was your safety or the safety of others put at risk? The vehicle moved autonomously and struck an object without driver input, resulting in a collision. A pedestrian, cyclist, or other vehicle in the path could have been seriously injured. The incident demonstrates the system cannot be trusted to safely detect and avoid obstacles while in control of the vehicle. Has the problem been reproduced or confirmed by a dealer or independent service center? Not yet. The vehicle is being brought to the selling dealer for a diagnostic scan to retrieve fault codes from the Park Assist module. This report is being filed prior to that inspection. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Not yet. BMW North America has been notified. Dealer inspection is pending. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No warning lamps or messages appeared prior to the incident. The system gave no indication of malfunction before directing the vehicle into the object.

Driving at 70 mph down a clear stretch of highway, no cars in front, panoramic sunroof spontaneously exploded. Not under an overpass, no flying debris. Temperature was 54 degrees F. on a sunny day. The vehicles behind me pulled back as my sunroof showered them. Wife and daughter in vehicle, fortunately, the panoramic shade was closed, so no debris impacted anyone. As it’s visible on the pictures, the explosion was outwards.

As I was easing my 2024 BMW i4 xDrive40 onto Church Street from a cross street on May 11, 2026, my car suddenly accelerated and crashed into the car in front of me. The acceleration was "un-commanded." The accident occured a bit before 2:20 pm. Driving conditions were ideal. I had the car in Eco Mode, and I was using one-pedal driving (braking when one eases up on the accelerator pedal). When the car becan accelerating. I believe that I had time to depress the brakes, but it was to no avail. There were no reportable injuries and no police report. My car has automatic emergency braking, and on two separate occasions the car braked suddenly when "it" thought that I was approaching a car to quickly. It did not function in this instance to stop my car from crashing into the car in front of me. I had never previously seen the car behave like this. I had owned the car since its initial purchase in August of 2024.

I was told this car has rear cross traffic warning when I ordered it from our local BMW dealer. After several "close calls" in parking lots, I took it into the dealer because it doesn't work like any of our other vehicles (Mercedes). I was told by the dealer that you have to be actively backing up and the car has to be immediately behind you in a very close proximity to the car before it will even alert you. There doesn't seem any active braking either. When you do a search on this issue with BMW's, it is a very common complaint of BMW owners. I believe this is a major safety issue with the feature that BMW claims.

Recently purchased used iX and successfully used the Parking Assistant Professional about a dozen times to back into my home garage using 5-point maneuver (driveway layout visible from aerial photo from address provided with report; drove in straight passed spot on garage’s left side looking in, other SUV parked in right spot, back into perpendicular spot in garage). After recording a new 3-point path, I tried it for the first time. During that attempt, the SUV suddenly reversed too fast to stop before crashing into another car in the garage. The vehicle initially followed the recorded path, then paused during first reverse because of an apparent obstruction (car approaching leaves on bush along driveway). After manually moving the SUV backwards a few feet along path to clear obstruction, I attempted to resume the maneuver. The screen showed the words “Resume path” (think there were up to 4 words, but this was only option on right side of parking interface), although flickering to say “Show path.” The vehicle then began to reverse. It was only ~6 feet, so wasn’t worried about acceleration for about half a second or so. Car continued to accelerate in reverse so fast that when I realized it wasn’t going to stop for the other car I had only got my foot on the brake when it hit the other car. Photos: IMG_3223 is iX showing bumper damage. IMG_3220 & -21 are other car, with bumper scratches and broken taillight. The event happened too quickly to allow braking, and the obstruction sensors didn’t even beep, let alone stop the routine. Damage to both cars appears to be relatively minor, but if a person had been standing near the other vehicle, they would have been seriously injured or killed. This behavior appears similar to NHTSA Complaint Nos. 11589034, 11569633, and 11546743. I bought this car in part because of the automated parking features that I am now too terrified to use.