Speed profiles do not allow safe operation of the vehicle. Changes in speed profiles result in unsafe behavior. Standard speed profile regularly results in speed up to 73+ in a 55mph zone being selected by the vehicle. Chill mode results in speeds of 58 when traffic is traveling at 65mph. Switching profiles from standard to chill results in a rapid deceleration within the lane leading to problems with traffic behind the vehicle. In active school zones, system regularly does not acknowledge school zone speed limit and proceeds at 25-30mph in a 15 mph school zone even on Sloth profile. European FSD has a max speed setting that allows these problems to be prevented, but it is missing as a critical safety feature in the US version of FSD 14.

Rear passenger door electronic release did not work. Technician indicated rear door harness corroded making the door inoperable.

- Tesla FSD - My son was driving on FSD on state highway, while on FSD, the car suddenly turned left and hit the concrete barrier and spun out of control. All the air-bags were deployed and car front crashed completely. The car is near totaled, My son was able to get out the car with a bruise on right hand. -No -No -No warning was on, the car was on full FSD and suddenly turned left and drove into the concrete barrier and crashed and spun , I had no time to react/take over.

I was using actual smart summon to get my vehicle out of my garage. While standing behind the vehicle, it indicated that the car was in drive with no reversing lights on. The vehicle then rapidly lurches backwards, striking me and a freezer. After reviewing the dashcam footage the vehicle stated it was in drive and never once activated its reverse lights, even when they was objects and a human behind the car, still reversed at a high rate of speed.

Attached is a photo of the lower driver-side knee bolster/under-dash panel after it detached while I was driving. The panel dropped directly into the pedal area and interfered with normal foot access to the brake and accelerator pedals. Given that no broken attachment points or damaged clips were reportedly identified, I am requesting a formal review of both the safety concern and the handling of this issue.